Carrier Fire & Security B.V.

As a standalone company, we are able to define our company including our culture and values. Thousands of employees helped create our values and living these five values will be a key part of our success as we start our new beginning together:

رتب بـ
العرض في الصفحة


The SIGA-CT1 Single Input Module, SIGA-CT1HT High Temperature Single Input Module and SIGA-CT2/SIGA-MCT2 Dual Input Modules are intelligent analog addressable devices used to connect one or two Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). The actual function of these modules is determined by the “personality code” selected by the installer. This code is downloaded to the module from the Signature loop controller during system configuration. The input modules gather analog information from the initiating devices connected to them and convert it into digital signals. The module’s on-board microprocessor analyzes the signal and
91.70 (AED)

449 :: Weatherproof Backbox, Cast - Surface

Edwards die-cast weatherproof backboxes are perfect for mounting a variety of Edwards signaling appliances such as bells, horns and sirens. They are made from die-cast aluminum and finished at the factory with a baked “Sage Gray” enamel finish. All boxes are shipped complete with a molded neoprene gasket. They all feature 3/4 inch tapped conduit entries.
149.00 (AED)

EST WG4RF-HVMC Outdoor/Indoor Horn Strobe

Genesis WG4 Series horns and horn-strobe appliances are among the most versatile emergency appliances of their kind. Rated for indoor or outdoor use, they are suitable for a wide range of wet and harsh environments with a listed operating temperature range of as low as -40 °F to as high as 151 °F (-40 °C to 66 °C). Field-configurable light and sound output settings add to their onsite flexibility, while optional FIRE markings make them ideal for fire alarm applications. These appliances are suitable for indoor and outdoor applications, and are ideal for challenging conditions such as parking garages and process areas. They are available for mounting on the ceiling or the wall, and thanks to an ingenious optional full backplane sealing gasket, can be installed to recessed (in-the-pour/block) electrical boxes. WG4 notification appliances also mount to suitable surface boxes. Optional color-matched trim skirts provide a clean, finished appearance. All appliance wiring is accomplished room-side for easy installation.
285.00 (AED)

Manual Pull Stations SIGA-270, SIGA-270P, SIGA-278

The SIGA-270 and SIGA-278 series Manual Pull Stations are part of EDWARDS’s Signature Series system. EDWARDS’s double action single stage SIGA-278 station is a contemporary style manual station made from durable red colored lexan. To initiate an alarm, first lift the upper door marked “LIFT THEN PULL HANDLE”, then pull the alarm handle.
152.00 (AED)

SIGA-LED :: Remote Alarm LED. Use with -SB and -SB4 Sta

The SIGA-LED Remote LED Alarm Indicator is a polarized device that provides visual indication when a detector initiates an alarm. A clear lens, light emitting diode pulses on and off in case of an alarm condition
23.00 (AED)

Intelligent Heat Detectors; SIGA-HRD, SIGA-HFD

The Signature Series smoke detectors bring advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends property protection capabilities. Continuous self-diagnostics ensures reliability over the long-haul, while the latest thermister technology makes these detectors ideal wherever dependable heat detection is required. The SIGA-HRD is an intelligent fixed temperature/rate-of-rise fire detector. It monitors the temperature of the surrounding air and analyzes the data from the sensor to determine whether to initiate an alarm. The rate-of-rise heat function quickly detects a fast, flaming fire. The fixed-temperature heat function detects fire when the air temperature near the detector exceeds the alarm point.
69.00 (AED)