Wall

Skyrock Gypsum Board Moisture Resistant wet stop is asbestos-free, 1200 x 2400mm standard panel size and has a noncombustible gypsum core that is enclosed in a sturdy natural-finish paper on the face side and a sturdy liner paper on the reverse. The moisture resistance of the gypsum core is enhanced by the use of specific chemicals that provide a better resistance to water penetration. The face paper is folded over the long edges to reinforce and safeguard the core. The ends have a clean finish and a square cut. Long edges of panels are recessed (tapered), allowing joints to be strengthened and concealed with a joint treatment. Unit:M2

Skyrock Regular Gypsum Board is asbestos free products and standard dimension 1200mm x 2400mm composed of a noncombustible gypsum core and encased in a heavy natural-finish paper on the face side and a strong liner paper on the back side. The face paper is folded around the long edges to reinforced and protect the core. Board ends are square cut and finished smooth. Long edges of panels are recessed (tapered) allowing joints to be reinforced and concealed with a joint treatment. Unit: M2

Drop in anchor used for threaded rod fixing into slabs (Ceiling Fixation) Unit: BOX

UNIT: M2 Features are ; 1.Excellent thermal insulation. Thermal conductivity (λ) of 0.035 (W/m.K) at 25 ⁰C 2.Excellent sound absorption properties 3.Effective fire protection. 4.Lightweight, and easy to install 5.Dimensioned to suit studs with 600mm centres 6.Low emitting for indoor air quality considerations 7.Skyrock Glass Wool is odourless, rot proof, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, mould or bacteria 8.Skyrock Glass Wool has no threat to the environment and has zero Ozone Depletion 9.Potential and zero Global Warming Potential

General Purpose Setting-Type Basecoat is composed of Portland cement and dry latex polymers specially designed for exteriors walls, ceilings system (EIFS, Exterior insulation and finishing system). It is prepared on site with water and applied with exterior tape brand reinforcement at joints between boards, inside and outside corners. Meets the following standards ASTM C472-79, C266-86, C109-84, EN 99E-1. As a coating of 2.5 mm. over the entire surface and joints treatment between boards of cement board, approximate Coverage - 7 to 8 square meter per bag. As a coating of 1.5 mm. over the entire surface and joints treatment between boards of cement board, approximate Coverage - 9 to 10 square meter per bag. As a bonding for insulating sheathing rigid extruded polystyrene, approximate coverage - 12 to 14 square meters per bag. UNIT:BAG

Interior and Exterior Tapes are specially designed to reinforce the joints and corners of tile backerboard panels. Exterior Tape 100mm wide required for completely covering and reinforcing corners and joints of Cement Board when used as an exterior substrate. UNIT:ROLL