Plumbing-Water

Application: Pressure Boosting Pumps System: Triplex System Hydraulic Data/Pump: 20 L/s @ 8 bar Pump Model: MovitecVF 60/3 Pump Type: Vertical Inline Multistage Materials: SS 304 Casing/SS 304 Impeller Motor: 30KW, 3500 RPM, 380V ,TEFC, Class F -Control Panel: to run the pumps as 2 Duty + 1 Standby ,IP54 Enclosure, 3VFDs -Supplied with suction and discharge headers,isolating valves on both pumps sides, check valves on pumps discharge sides,end cap, priming valve, pressure gauge and rubber pads

Application: Water Circulation Pumps System: Duplex System Hydraulic Data/Pump: 3 L/s @ 1.5 bar Pump Model: MovitecV 10/2 Pump Type: Vertical Inline Multistage Materials: SS 304 Casing/SS 304 Impeller Motor: 1.5KW, 3500 RPM, 380V ,TEFC, Class F -Control Panel: to run the pumps as 1 Duty + 1 Standby ,IP54 Enclosure, DOL Starting Method -Supplied with suction and discharge headers,isolating valves on both pumps sides, check valves on pumps discharge sides,end cap, priming valve, pressure gauge and rubber pads

Application: Hot Water Circulation Pumps System: Duplex System Hydraulic Data/Pump: 2 L/s @ 2 bar Pump Model: MovitecV 6/2 Pump Type: Vertical Inline Multistage Materials: SS 304 Casing/SS 304 Impeller Motor: 0.75KW, 3500 RPM, 380V ,TEFC, Class F -Control Panel: to run the pumps as 1 Duty + 1 Standby ,IP54 Enclosure, DOL Starting Method -Supplied with suction and discharge headers,isolating valves on both pumps sides, check valves on pumps discharge sides,end cap, priming valve, pressure gauge and rubber pads

Application: Water Circulation Pumps System: Duplex System Hydraulic Data/Pump: 10 L/s @ 1.5 bar Pump Model: MovitecVF 25/1 Pump Type: Vertical Inline Multistage Materials: SS 304 Casing/SS 304 Impeller Motor: 3KW, 3500 RPM, 380V, TEFC, Class F -Control Panel: to run the pumps as 1 Duty + 1 Standby, IP54 Enclosure, DOL Starting Method -Supplied with suction and discharge headers, isolating valves on both pumps sides, check valves on pumps discharge sides, end cap, priming valve, pressure gauge and rubber pads

Rotary actuator for zone valves • Torque motor 1 Nm • Nominal voltage AC/DC 24 V • Control modulating 2...10 V • Position feedback 2...10 V • Snap-assembly of the actuator • Flow setting variable

• Nominal voltage AC/DC 24 V • Control modulating, communicative, hybrid • For closed cold and warm water systems • For modulating control of air-handling and heating systems on the water side • Communication via BACnet MS/TP, Modbus RTU, Belimo-MP-Bus or conventional control • Conversion of active sensor signals and switching contacts • Measurement of the fluid temperature