Fire Suppression

Double Vertical Hose Reel Cabinet, Recessed Type, Solid Door, Stainless Steel 304 Facia (Brush), Back Box Electro Galvanized Sheet - Naffco The fire-rated option eliminates the costly need to line the wall opening with fire-rated materials. It also provides the specifier assurance in maintaining the integrity of the wall penetration and in meeting building code specification

Fire Hose Reel 1" x 30 Mtr. Wall Mounted Swinging Automatic Type (Steel), Brass Chrome Plated Rotary Nozzle, SLIM Type, Model: NFH-W-25A - Naffco

Lock Shield Valve is usually installed where an unauthorized operation has to be avoided. A typical application of this valve is installing these at inlet pipe to the hose reel where it can be opened only by key and key kept by maintenance or fire safety department

The PISTON-type pressure reducing valve PN 25 is an automatic valve that reduces and stabilizes the pressure of a fluid in a water distribution conduit according to a preset value. The use of this hydraulic device is necessary if the maximum possible pressure at any point in the water distribution system can reach or exceed the relative maximum allowable working pressure, or if the installation is equipped with devices that can be operated exclusively at pressure levels lower than the one available in the system

The single jacket fire hose consists of 100% polyester plain-woven synthetic and natural rubber linings. This fire hose has very good resistance to ageing and abrasion. The light fire hose is suitable for normal situation. The single jacket hose made of high tenacity polyester staple and polyester filaments. Lining is natural rubber. Jacket is plain. There is a special adhesion between the jacket and the rubber.

The Bronze Fog Bumper Nozzle has an adjustable annular orifice which enable the jet of water to be controlled from shut-off to a small jet through a large jet and then to a spray pattern by turning the rubber tyred sleeve for class A and class B fire.