Equipments

200 m3/min@7barg Air connection: DN200 Partical removal: 25um Free of silicone ASME standard pressure vessel without U stamp Material: SS304 Electronic drain included Differential pressure gauge not included

200 m3/min@7barg Air connection: DN200 Partical removal: 1um Free of silicone ASME standard pressure vessel without U stamp Material: SS304 Manual valve drain included Differential pressure gauge included

200 m3/min@7barg Air connection: DN200 Partical removal: 1um Oil removal: 0.6mg/m3 Free of silicone ASME standard pressure vessel without U stamp Material: SS304 Electronic drain included Differential pressure gauge included

 Made in Germany 100%  FAD Range :2.00 M3/min(76.63 CFM)  Max. Over pressure 11 bar g  Motor 11 KW, 400V/3ph /60Hz  Air-cooled supplied with sigma control 2  Refrigeration Air Dryer: ABT 25  Air receiver :350 L  Sound Pressure level : <66db(A)  Air Connection compressed air :G 1  Dimensions: 750x1370x1880 mm  Weight :579 kg With Filtration

Stationary, Oil-free, Water-cooled, Rotary Screw air compressor, Two-stages, Drive: Variable Speed low voltage PM motors (Atlas Copco), VFD: Atlas Copco NEOS Drives, Electrical approval: IEC, Built-in Inter & After Coolers, Controller: Built-in Microprocessor-based (Elektronikon), Connection: ANSI flanges Included Options / Features: ▪ High ambient temperature (HAT) version ▪ Monitoring and Protection bundle (PT 100 in motor windings, Anti condensation heating, SPM ▪ Smart Link: Remote monitoring ▪ Water Shut-off valve ▪ Kit for purge during standstill ▪ Test certificate ▪ Witness Performance Test for one (1) unit Max. Compressed Air inlet pressure : 10.4 bar (g) Min. Compressed Air inlet pressure : 6 bar (g) Volume flow at dryer Inlet : 49.9 N m3/min Total installed electrical power : 2x 180 kW Main Power supply voltage : 380±10% V, 3 Ph, 60 Hz Starter : Star-Delta Included Mean sound pressure level : 74 dB(A)

Atlas Copco Stationary, Oil-Free, Water cooled, Three-stages, Fixed speed, Integrally geared Centrifugal Air Compressor, certified according to ISO 8573-1 Standard Class 0, Driven by medium voltage air-cooled IP55 electric motor (Siemens), Controller: Built-in Microprocessor-based (Elektronikon), Electrical approval: IEC, Connection: ANSI flanges Included Options / Features: ▪ Loose Inlet filter ▪ Loose Blow-off silencer ▪ Loose After-cooler ▪ Motor protection kit (Anti Condensation Heater & PT100’s in motor windings & bearings) ▪ Water Shut-off valve ▪ Smart Link: Remote monitoring ▪ Test Certificate Single Point (Core) ▪ Witness Mechanical Run test for one (1) unit Max. Effective working pressure : 13.0 bar (g) Min. Effective working pressure : 5.0 bar (g) Effective working pressure : 9.0 bar (g) Normal discharge flow per unit ▪ Min : 84.7 N m3/min ▪ Working : 130 N m3/min ▪ Max : 135 N m3/min Nominal motor power : 920 kW Main Power supply voltage : 4160 V, 3 Ph, 60 Hz Auxiliary Power supply voltage : 380 V, 3 Ph, 60 Hz Starter : DOL not included Mean sound pressure level : 83 dB(A)