Ceiling

U-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and window openings and when wallboard abuts dissimilar surfaces, such as suspended ceilings, beams, plaster, masonry and concrete. UNIT: LM

General Purpose Setting-Type Basecoat is composed of Portland cement and dry latex polymers specially designed for exteriors walls, ceilings system (EIFS, Exterior insulation and finishing system). It is prepared on site with water and applied with exterior tape brand reinforcement at joints between boards, inside and outside corners. Meets the following standards ASTM C472-79, C266-86, C109-84, EN 99E-1. As a coating of 2.5 mm. over the entire surface and joints treatment between boards of cement board, approximate Coverage - 7 to 8 square meter per bag. As a coating of 1.5 mm. over the entire surface and joints treatment between boards of cement board, approximate Coverage - 9 to 10 square meter per bag. As a bonding for insulating sheathing rigid extruded polystyrene, approximate coverage - 12 to 14 square meters per bag. UNIT:BAG

Interior and Exterior Tapes are specially designed to reinforce the joints and corners of tile backerboard panels. Exterior Tape 100mm wide required for completely covering and reinforcing corners and joints of Cement Board when used as an exterior substrate. UNIT:ROLL

UNIT:M2

UNIT:M2

UNIT:M2