U-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and window openings and when wallboard abuts dissimilar surfaces, such as suspended ceilings, beams, plaster, masonry and concrete. UNIT: LM
Solidrock Fiber Cement Boards are made from a mix of cement, cellulose fiber, and fire-resistant fillers. The boards having excellent resistance against fire, termite, and moisture make it an ideal material for varying interior and exterior applications. The recycled contents in the product composition make it more environmentally friendly. This product does not contain asbestos, formaldehyde, or harmful chemicals. It is the best substitution for wood substrate solutions with a contemporary range of green products suitable for all types of constructions. Features are ; 1.Asbestos-free 2.Moisture resistant 3.Dimensional stability 4.Non-combustible; Non-toxic 5.Withstands weather changes for exterior application, and is ideal for interior wet areas.
General Purpose Setting-Type Basecoat is composed of Portland cement and dry latex polymers specially designed for exteriors walls, ceilings system (EIFS, Exterior insulation and finishing system). It is prepared on site with water and applied with exterior tape brand reinforcement at joints between boards, inside and outside corners. Meets the following standards ASTM C472-79, C266-86, C109-84, EN 99E-1. As a coating of 2.5 mm. over the entire surface and joints treatment between boards of cement board, approximate Coverage - 7 to 8 square meter per bag. As a coating of 1.5 mm. over the entire surface and joints treatment between boards of cement board, approximate Coverage - 9 to 10 square meter per bag. As a bonding for insulating sheathing rigid extruded polystyrene, approximate coverage - 12 to 14 square meters per bag. UNIT:BAG
Interior and Exterior Tapes are specially designed to reinforce the joints and corners of tile backerboard panels. Exterior Tape 100mm wide required for completely covering and reinforcing corners and joints of Cement Board when used as an exterior substrate. UNIT:ROLL
Skyrock Fire Resistant (FR) Gypsum Board is a factory produced in a standard wide 1200mm special panel for fire resistance applications. The boards are composed of a noncombustible glass-fiber reinforced gypsum core mixed with special additives, encased in a heavy natural-finish paper on the face side and a strong liner paper on the back side. UNIT: M2