Pipes & Fittings

Produced from CPVC material meeting ASTM classification 23447 as defined in ASTM D1784.

Series FV-4 Automatic Vent Valves are used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with female NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug, and automatic vent. Series FV-4M1 has a high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. Can be disassembled for inspection and cleaning. Maximum Pressure: 150psi (10 bar).

Class 1 Air Ducts and are manufactured with a tri-directional fiberglass scrim reinforced, metallized polyester outer jacket. A double lamination of tough polyester which encapsulates a steel wire helix forms the air-tight inner core of the ATCO #030,. The double-layer core of each product is wrapped with a thick blanket of fiberglass insulation. The inner core of all three products is air tight and designed for low-to-medium operating pressures in HVAC systems. Air-tight Inner Core – Energy efficient / No fiberglass erosion into air stream Encapsulated Wire Helix – No unraveling when cut to length / Quick installation Smooth Inner Core – Low friction loss / Low operating cost Highly Resistant to Mold Growth – Tested and Listed to UL Environment’s Standard UL 2824 Certified for Low Chemical Emissions – Tested and Certified to UL Environment’s Standard UL 2818 Certified Thermal Performance (R-values) – UL Classified to Air Diffusion Council test program Tough Reinforced Metallized Polyester Jacket – Tear and puncture resistant / Low maintenance Lightweight Compact Carton/Bag – Reduces warehouse and jobsite handling cost Formaldehyde Free – Made with Owens Corning EcoTouch Insulation

· SIZE RANGE: 4MM THROUGH 24MM. · MATERIAL: CARBON STEEL; DIN 933/934, GRADE 4.8 · FINISH: ELECTRO ZINC/DACROMET FINISH. · MAXIMUM TEMPERATURE: 750 DEG. F

· APPLICATION: DROP-IN ANCHORS ARE INTERNALLY THREADED, DEFORMATION CONTROLLED EXPANSION ANCHORS WITH PREASSEMBLED EXPANDER PLUG, SUITABLE FOR FLUSH MOUNT APPLICATIONS IN SOLID BASE MATERIAL. THE ANCHOR IS BY DRIVING THE EXPANSION PLUG TOWARDS THE BOTTOM OF THE ANCHOR USING THE SETTING TOOL. · SIZE RANGE: 6MM THROUGH 24MM · MATERIAL: CARBON STEEL; GRADE 4.8 · FINISH: ELECTRO ZINC PLATED. / DACROMATE FINISH. · MAX TEMPERATURE: 750 DEG. F

SAH Self Adhesive Hangers with Washer Pin: min. 12 Gauge Zinc Plated Base dimension: 2" x 2" galvanized 28 Gauge steel Adhesive: Polyethylene double coated foam tape Shelf Life: 2 years @ 70° and 50% humidity